|
"WOW! What a pleasant improvement. With
the old brakes I set the Prodigy on max gain at
12 with never a hint of a lockup. Now I set the
gain at 7.5 and am at the verge of lockup. Plus the brakes are now
linear. You spoke the truth! Thanks for a great product."
Sincerely Stan
Frank, 30 Ft Air Stream Tandem Axle Conversion
|
|
HD3000 is now being installed as standard equipment by fine trailer manufacturers. When requesting Hydraulic Brakes on your next vehicle insist on Tow Brake's HD3000 HyPowered Disc Technology, they
do!
|
The Difference of the HD3000 Hypowered
System!
- Quickest Brake Activation and
Release
- Works With Any Standard Brake
Controller
(including Ford's Super Duty Factory System)
- Backed by the Longest Warranty in
the Industry
- Dual Hydraulic Supply Lines for
added safety (just like your auto!)
- Built-In User Diagnostics
- Truly Proportional Hydraulic
Braking
- Models available for Disc or Drum
Applications (1600psi, 1000psi)
|
Advantages of Disc Over
Electric Drum Brakes:
Less fade at
high temperatures of up to 1,500 F
Linear
relationship between brake torque and pad/rotor friction
Fewer moving
parts for easier maintenance
Better
corrosion resistance
Will you be able to stop better,
read
what the experts say! |
|
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Actual test results of 7,000lb.
trailer towed by a Chevy 1/2 ton 4-wheel drive pickup stopping
from 40mph on dry pavement. |
|
Compare HYPOWERED DISC Brakes to Electric Drum Brakes!
DRASTICALLY SHORTER STOPS!
LONGER FRONT BRAKE
LIFE ON TOWING VEHICLE!
NO READJUSTMENT of
controller gain for city traffic or highway speeds.
Brakes work in proportion to towing vehicle.
OPERATES COOLER -
GREATLY REDUCING BRAKE FADE ON DOWNGRADES!
What about
the cost factors? Read an article on the subject.
The Hypowered Disc Conversion
System Kit contains everything you need
to convert your brakes. The system installation is designed for those
who normally service their own brakes.
INCLUDES: |
|
New rotor/hubs, and Calipers (bearings and seals are purchased separately)
Pre-assembled and flared brake lines
All
necessary Hardware and
fittings
|
|
HD3000
Actuator and wiring
Step-by-step
installation manual |
|
|
|
|
How to determine what size axles you have: |
1.
Check identification tag on axle
2.
Count number of wheel lug bolts: 5, 6 or 8
3.
Measure diameter of wheel lug bolt: 1/2" or 9/16"
4. Count the number of bolts in the brake mounting flange
on the axle
Contact us at
the factory if you have questions! |
|
Still have questions, see our
frequently asked questions.Contact us if you have questions at the number below or via e-mail.
Phone: 
|